Wheel Hub 512499
The DUHUI Bearing 512499 wheel hub is a direct OE-replacement assembly designed for Ford Kuga, Escape, C-Max, and Lincoln MKC models. This rear wheel hub bearing matches OE references including 512499, CV6Z1104F, BR930932, and HA590476, and is engineered for rear axle applications on these compact SUV and MPV platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1740 |
| Part Number | 512499 |
| Position | Rear Axle (Left, Right) |
| Design Type | Gen 3 |
| Bearing Type | Ball Bearing |
| Inside Diameter | 63.50 mm (2.500 inch) |
| Outside Diameter | 136.00 mm (5.354 inch) |
| Flange Diameter | 136.50 mm (5.374 inch) |
| Flange Offset | 73.00 mm (2.874 inch) |
| Bolt Circle Diameter | 107.90 mm (4.248 inch) |
| Brake Pilot Diameter | 63.40 mm (2.496 inch) |
| Hub Pilot Diameter | 81.30 mm (3.201 inch) |
| Wheel Pilot Diameter | 63.00 mm (2.480 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1740
OE Numbers: 512499, CV6Z1104F, BR930932, HA590476, 7253120, WE61442, HUB220, CV612C299ANA, CV6Z1104B, CV6Z1104C
Reference Numbers (Interchange):
SKF: BR930957
Timken: HA590476
NTN: WE61442
MOOG: 512499
Mevotech: H512499
BCA: WE61442
GMB: 725-3120
SKV: 29SKV310
Vehicle Fitment
Ford:Escape (2013-2019), C-Max (2013-2018)
Lincoln: MKC (2015-2019)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- Roll-form design provides factory-installed preload to lower excessive noise and reduce premature wear.
- 136.50 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Ford and Lincoln models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Quad lip seal design keeps out moisture and contaminants to extend service life.
Installation Notes
- This hub is for rear axle applications on Ford Kuga II, Escape, C-Max, Transit Connect, Tourneo Connect, and Lincoln MKC models – verify position before ordering.
- Confirm the 5-stud flange pattern and 136.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Ford factory specifications for the specific model – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
