Wheel Hub 512415
The DUHUI Bearing 512415 rear wheel hub is a direct OE-replacement assembly designed for Kia Borrego (Mohave) models from 2007 through 2010. This rear wheel hub bearing matches OE references including 512415, 527302J000, 2282HMR, and 922576, and features a Gen 3 roll-form design with 6-stud heavy-duty configuration for rear axle applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01286 |
| Part Number | 512415 |
| Position | Rear Axle |
| Outside Diameter | 139.30 mm (5.484 inch) |
| Inside Diameter | 69.00 mm (2.717 inch) |
| Number of Bolt Holes | 6 |
| Flange Bolt Hole Quantity | 4 |
| Design Type | Gen 3 (Roll-Form Design) |
| Pre-Greased | Yes |
| ABS Sensor | Non-Integral |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01286
OE Numbers: 512415, 527302J000, 2282HMR, 922576
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590153
NTN: WE61058
Vehicle Fitment
Kia: Borrego (Mohave) EX V6 3.8L 2009-2010, Borrego EX V8 4.6L 2009-2010, Borrego LX V6 3.8L 2009-2010, Borrego LX V8 4.6L 2009-2010, Barui 2007+
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear axle wheel hub bearing engineered for Kia Borrego (Mohave) SUV applications.
- Gen 3 roll-form design provides improved structural integrity and durability for heavy-duty applications.
- 6-stud configuration delivers enhanced load capacity for full-size SUV applications.
- 4-bolt mounting flange provides secure attachment to the rear axle carrier.
- 139.30 mm outside diameter with 69.00 mm inside diameter matches factory specifications.
- Pre-greased and sealed – ready for installation with no additional lubrication required.
- Designed for non-integral ABS sensor – confirm your vehicle’s ABS configuration before ordering.
- Direct OE cross-reference to 512415, 527302J000, 2282HMR, and 922576 ensures accurate replacement.
Installation Notes
- This hub is specified for rear axle installation – confirm your application.
- Confirm 6-stud pattern matches your vehicle.
- This hub requires a separate ABS sensor (non-integral) – verify your vehicle’s sensor configuration.
- Clean the mounting surface thoroughly before installation.
- Torque the hub retaining nut and wheel lug nuts to Kia factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
