Wheel Hub 512412
The DUHUI Bearing 512412 rear wheel hub is a direct OE-replacement assembly designed for Volvo S40 and V50 models from 2003 through 2012. This rear wheel hub bearing matches OE references including 512412, 051450B, BR930705, and VKBA6791, and features a Gen 3 roll-form design with 5-stud configuration for rear axle applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01285 |
| Part Number | 512412 |
| Position | Rear Axle |
| Outside Diameter | 135.80 mm (5.346 inch) |
| Inside Diameter | 63.50 mm (2.500 inch) |
| Number of Bolt Holes | 5 |
| Flange Bolt Hole Quantity | 4 |
| Design Type | Gen 3 (Roll-Form Design) |
| Pre-Greased | Yes |
| ABS Sensor | Non-Integral |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01285
OE Numbers: 512412, 051450B, BR930705, VKBA6791
Reference Numbers (Interchange):
SKF: BR930705
Timken: VKBA6791
NTN: WE61058
Vehicle Fitment
Volvo: S40 II Sedan 2003-2012, V50 Station Wagon 2003-2012, S40 2.4I L5 2.4L 2005-2010
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear axle wheel hub bearing engineered for Volvo S40 and V50 sedan and wagon applications.
- Gen 3 roll-form design provides improved structural integrity and durability.
- 5-stud pattern matches factory wheel fitment for these Volvo models.
- 4-bolt mounting flange provides secure attachment to the rear axle carrier.
- 135.80 mm outside diameter with 63.50 mm inside diameter matches factory specifications.
- Pre-greased and sealed – ready for installation with no additional lubrication required.
- Designed for non-integral ABS sensor – confirm your vehicle’s ABS configuration before ordering.
- Direct OE cross-reference to 512412, 051450B, BR930705, and VKBA6791 ensures accurate replacement.
Installation Notes
- This hub is specified for rear axle installation – confirm your application.
- Confirm 5-stud pattern matches your vehicle.
- This hub requires a separate ABS sensor (non-integral) – verify your vehicle’s sensor configuration.
- Clean the mounting surface thoroughly before installation.
- Torque the hub retaining nut and wheel lug nuts to Volvo factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
