Wheel Hub 512411
The DUHUI Bearing 512411 rear wheel hub is a direct OE-replacement assembly designed for Volvo C30, C70, S40, and V50 models from 2003 through 2013. This rear wheel hub bearing matches OE references including 512411, BR930519, HA590192, and 31280051, and features a Gen 3 roll-form design with 5-stud configuration for rear axle applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01284 |
| Part Number | 512411 |
| Position | Rear Axle |
| Outside Diameter | 136.00 mm (5.354 inch) |
| Inside Diameter | 63.40 mm (2.496 inch) |
| Number of Bolt Holes | 5 |
| Flange Bolt Hole Quantity | 4 |
| Design Type | Gen 3 (Roll-Form Design) |
| Pre-Greased | Yes |
| ABS Sensor | Non-Integral |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01284
OE Numbers: 512411, BR930519, HA590192, 31280051
Reference Numbers (Interchange):
SKF: BR930519
Timken: HA590192
NTN: WE61058
Vehicle Fitment
Volvo: C30 Hatchback 2006-2013, C70 Convertible 2006-2013, S40 II Sedan 2003-2012, V50 Station Wagon 2003-2012, C30 2.4I L5 2.4L 2008-2010
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear axle wheel hub bearing engineered for Volvo C30, C70, S40, and V50 applications.
- Gen 3 roll-form design provides improved structural integrity and durability.
- 5-stud pattern matches factory wheel fitment for these Volvo models.
- 4-bolt mounting flange provides secure attachment to the rear axle carrier.
- 136.00 mm outside diameter with 63.40 mm inside diameter matches factory specifications.
- Pre-greased and sealed – ready for installation with no additional lubrication required.
- Designed for non-integral ABS sensor – confirm your vehicle’s ABS configuration before ordering.
- Direct OE cross-reference to 512411, BR930519, HA590192, and 31280051 ensures accurate replacement.
Installation Notes
- This hub is specified for rear axle installation – confirm your application.
- Confirm 5-stud pattern matches your vehicle.
- This hub requires a separate ABS sensor (non-integral) – verify your vehicle’s sensor configuration.
- Clean the mounting surface thoroughly before installation.
- Torque the hub retaining nut and wheel lug nuts to Volvo factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
