Wheel Hub 512389
The DUHUI Bearing 512389 wheel hub is a direct OE-replacement assembly designed for Nissan Altima and Maxima models. This rear wheel hub bearing matches OE references including 512389, BR930698, and HA590253, and is engineered for rear axle applications on these FWD platforms. It serves as a reliable OEM replacement wheel hub for daily driving.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1270 |
| Part Number | 512389 |
| Position | Rear Axle |
| Design Type | Gen 3 |
| Inside Diameter | 67.90 mm (2.673 inch) |
| Outside Diameter | 148.00 mm (5.827 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Wheel Stud Quantity | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1270
OE Numbers: 512389, BR930698, HA590253, 43202-JP00A, 43202-JA010
Reference Numbers (Interchange):
SKF: BR930698
Timken: HA590253
NTN: HUB380T-4
SNR: R168.79
MOOG: 512389
Mevotech: G30303
BCA: WE60522
Vehicle Fitment
Nissan: Altima (2007-2012), Maxima (2009-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 4-bolt flange pattern with 148.00 mm flange diameter matches the original mounting configuration on Nissan Altima and Maxima models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Premium quad-lip seal design provides maximum protection against contamination.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for rear axle applications only – verify position before ordering.
- Confirm the 4-bolt flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Nissan factory specifications for the Altima and Maxima.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
