Wheel Hub 512388
The DUHUI Bearing 512388 wheel hub is a direct OE-replacement assembly designed for Nissan Altima and Maxima models. This rear wheel hub bearing matches OE references including 512388, BR930698, and HA590253, and is engineered for rear axle applications on these FWD platforms. It serves as a reliable OEM replacement wheel hub for daily driving.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1269 |
| Part Number | 512388 |
| Position | Rear Axle |
| Design Type | Gen 3 (Roll-Form Design) |
| Inside Diameter | 68.00 mm (2.677 inch) |
| Outside Diameter | 148.00 mm (5.827 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Wheel Stud Quantity | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1269
OE Numbers: 512388, BR930698, HA590253, VKBA7619, 051862B, 43202-JA000, 43202-3JA0A, 43202-3JA0C, 43202-3JA1C, 43202-3TA0A, 43202-5NA0C
Reference Numbers (Interchange):
SKF: BR930698
Timken: HA590253
NTN: WE60567
MOOG: 512388
Mevotech: H512388
BCA: 512388
GMB: 730-0355
Vehicle Fitment
Nissan: Altima (2007-2018), Maxima (2009-2019), Murano (2015-2023), Pathfinder (2013-2020)
Infiniti: JX35 (2013), QX60 (2014-2020)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design for simplified rear axle installation on Nissan and Infiniti FWD platforms.
- Non-integrated ABS design works with the existing wheel speed sensor on the vehicle.
- 148.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Altima and Maxima models.
- 5 wheel studs with 114.30 mm bolt circle diameter ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Engineered to OE specifications for proper fit and function on the Altima, Maxima, Murano, Pathfinder, JX35, and QX60 platforms.
Installation Notes
- This hub is for rear axle applications on Nissan and Infiniti FWD models – verify position and drive type before ordering.
- Confirm the 4-bolt flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to manufacturer specifications for the Altima and Maxima.
- Inspect the existing ABS sensor and wiring harness before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
