Wheel Hub 512386
The DUHUI Bearing 512386 wheel hub is a direct OE-replacement assembly designed for Nissan Versa models from 2007 through 2012. This rear wheel hub bearing matches OE references including 512386, BR930740, and HA590286, and is engineered for rear axle applications on the C11 platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1267 |
| Part Number | 512386 |
| Position | Rear Axle |
| Design Type | Gen 3 (Roll-Form Design) |
| Inside Diameter | 68.00 mm (2.677 inch) |
| Outside Diameter | 148.00 mm (5.827 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Width | 120.00 mm (4.724 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Wheel Stud Quantity | 4 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1267
OE Numbers: 512386, 43202EL000, 421035, 432021J61A, R16878, 43202EM30A, 432021YP0A, 43202EE500
Reference Numbers (Interchange):
SKF: BR930740
Timken: HA590288
NTN: WE60517
MOOG: 512386
Mevotech: H512386
BCA: WE60517
GMB: 750-0034
WJB: WA512386
Vehicle Fitment
Nissan: Versa (2007-2012), Tiida (2010-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design provides stable load distribution for rear axle applications on Nissan Versa models.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 148.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Versa and Tiida models.
- 4 wheel studs with 114.30 mm bolt circle diameter ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Versa and Tiida models – verify position before ordering.
- Confirm the 4-stud flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Nissan factory specifications for the Versa.
- Keep the hub away from strong magnetic sources before installation to protect the integrated encoder ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
