Wheel Hub 512363
The DUHUI Bearing 512363 wheel hub is a direct OE-replacement assembly designed for Nissan Murano AWD models from 2003 through 2007. This rear wheel hub bearing matches OE references including 512363, BR930477, and RW8363, and is engineered for rear axle applications on this crossover SUV platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1254 |
| Part Number | 512363 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 60.00 mm (2.362 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 65.94 mm (2.596 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Thread Pitch to Wheel Mounting | 1.25 mm (0.049 inch) |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 32 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1254
OE Numbers: 512363, RW8363, BR930477, 43202-CA000, 43202-CA010, 43202-CA00A
Reference Numbers (Interchange):
SKF: BR930477
Timken: HA590121
NTN: WE60546
MOOG: 512363
Mevotech: H512363
BCA: 512363
GMB: 730-0300
Vehicle Fitment
Nissan: Murano (2003-2007) AWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 32-spline count ensures proper engagement with the axle shaft on AWD models.
- 148.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Nissan Murano AWD models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for rear axle applications on Nissan Murano AWD models – verify position and drive type before ordering.
- Confirm the 32-spline count on the axle shaft matches this hub before installation.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Nissan factory specifications for the Murano – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
