Wheel Hub 512358
The 512358 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the rear axle of Suzuki XL7 (DA, DB) vehicles manufactured between 2006 and 2009. This complete Gen 3 hub assembly includes an integrated ABS sensor and is pre-assembled for simplified installation. This kit matches OE specifications including 4340278J01, and interchanges with industry-standard references such as Timken 512358, SKF BR930842, and Moog RW8358.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1250 |
| Part Number | 512358 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Kit Contents | Hub × 1 |
| Design Type | Gen 3 (Roll-Form Design) |
| Inside Diameter | 70.50 mm (2.776 inch) |
| Outside Diameter | 151.00 mm (5.945 inch) |
| Wheel Stud Quantity | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | With integrated sensor |
| Pre-Greased | Yes |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1250
OE Numbers:
4340278J01
Reference Numbers (Interchange):
Timken: 512358
SKF: BR930842
Moog: RW8358
Vehicle Fitment
SUZUKI XL7 (DA / DB): 2006–2009
All applications: Rear Axle. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Suzuki XL7 applications. Matches OE specification 4340278J01.
- Gen 3 roll-form design ensures consistent and optimal factory-installed preload, minimizing noise and wear.
- Integrated ABS sensor ensures proper anti-lock braking system function.
- 5-bolt wheel mounting pattern with 4-bolt flange attachment provides secure installation.
- Pre-set, pre-lubricated with high-temperature grease, and sealed – maintenance-free design.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Verify your vehicle is equipped with ABS before installation. This hub includes an integrated ABS sensor.
- Before installation, compare the inside diameter (70.50 mm) and outside diameter (151.00 mm) against your original hub.
- Confirm the 5-bolt wheel pattern and 4-bolt flange pattern match your vehicle.
- This hub features Gen 3 roll-form design with precise factory preload. Do not attempt to adjust or repack the bearing.
- Connect the ABS sensor harness properly and ensure the cable is routed away from rotating components.
- Torque the hub mounting bolts and wheel nuts to Suzuki specification.
- This hub fits both rear driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
