Wheel Hub 512353
The DUHUI Bearing 512353 wheel hub is a direct OE-replacement assembly designed for Honda Accord and Acura TSX models from 2008 through 2012. This rear wheel hub bearing matches OE references including 512353, RW8353, and VKBA7540, and is engineered for rear axle applications on these platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1245 |
| Part Number | 512353 |
| Position | Rear Axle |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.50 mm (5.492 inch) |
| Flange Offset | 59.10 mm (2.327 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 72.00 mm (2.835 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Bolt Circle Diameter | 101.60 mm (4.000 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1245
OE Numbers: 512353, RW8353, VKBA7540, 42200-TA0-A01, 42200-TA0-A51, 42200-TL0-G51, 42200-TP0-951
Reference Numbers (Interchange):
SKF: BR930634
Timken: HA590360
NTN: WE61620
MOOG: 512353
Mevotech: H512353
BCA: 512353
GMB: 725-3300
Optimal: 962637
Vehicle Fitment
Honda: Accord (2008-2012)
Acura: TSX (2009-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 139.50 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Honda Accord and Acura TSX models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord and Acura TSX models – verify position before ordering.
- Confirm the 5-stud flange pattern and 139.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Accord and TSX – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
