Wheel Hub 512352
The DUHUI Bearing 512352 wheel hub is a direct OE-replacement assembly designed for Toyota Tundra and Sequoia models from 2007 onward. This rear wheel hub bearing matches OE references including 512352, BR930616, and RW8352, and is engineered for rear axle applications on these full-size truck and SUV platforms. It serves as a reliable OEM replacement wheel hub for both driver and passenger sides.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1244 |
| Part Number | 512352 |
| Position | Rear Axle (Left, Right) |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Inside Diameter | 49.00 mm (1.929 inch) |
| Outside Diameter | 128.60 mm (5.063 inch) |
| Width | 66.40 mm (2.614 inch) |
| Flange Diameter | 166.00 mm (6.535 inch) |
| Flange Offset | 68.60 mm (2.701 inch) |
| Bolt Circle Diameter | 141.00 mm (5.551 inch) |
| Brake Pilot Diameter | 99.00 mm (3.898 inch) |
| Hub Pilot Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 94.00 mm (3.701 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 26 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1244
OE Numbers: 512352, BR930616, RW8352, 42450-0C010, 42450-0C011, 42460-0C010, 42460-60030, 42450-60070
Reference Numbers (Interchange):
SKF: BR930616
Timken: BM500030
MOOG: 512352
BCA: WE61199
Mevotech: H512352
FAG: RW8352
GMB: 770-0040
DuraGo: 295-12352
Vehicle Fitment
Toyota: Tundra (2007-2021), Sequoia (2008-2022), Land Cruiser (2008-2011, 2013-2017)
Lexus: LX570 (2008-2011, 2013-2017)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and mounting points into one unit for simplified rear axle installation.
- Non-integrated ABS design uses a magnetic encoder ring, working with the existing wheel speed sensor on the vehicle.
- 26-spline count ensures proper engagement with the axle shaft on RWD and 4WD models.
- 166.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Toyota Tundra and Sequoia models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Cross-references to SKF, Timken, MOOG, BCA, and GMB part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Tundra, Sequoia, and Land Cruiser models – verify position before ordering.
- Confirm the 26-spline count on the axle shaft matches this hub before installation.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Toyota factory specifications for the Tundra and Sequoia – do not use an impact wrench.
- Keep the hub away from strong magnetic sources before installation to protect the encoder ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
