Wheel Hub 512293
The DUHUI Bearing 512293 wheel hub is a direct OE-replacement assembly designed for Subaru Legacy and Outback models from 1998 through 2015. This rear wheel hub bearing matches OE references including 512293, VKBA6889, and RW8293, and is engineered for rear axle applications on these sedan and station wagon platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1193 |
| Part Number | 512293 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 124.50 mm (4.902 inch) |
| Flange Offset | 66.00 mm (2.598 inch) |
| Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Brake Pilot Diameter | 58.40 mm (2.299 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Hub Bolt Circle Diameter | 106.70 mm (4.201 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1193
OE Numbers: 512293, VKBA6889, RW8293, 28473-AG000, 28473AG00A, 28473-AG00A, 28473XA00A
Reference Numbers (Interchange):
SKF: VKBA6889
Timken: HA590130
NTN: WE61718
MOOG: 512293
Mevotech: H512293
BCA: 512293
GMB: 730-0310
Vehicle Fitment
Subaru: Legacy Sedan (2003-2015), Legacy Station Wagon (2003-2009), Outback (BE, BH) (1998-2003), Outback (BP) (2003-2010)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 25-spline count ensures proper engagement with the axle shaft on AWD models.
- 124.50 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Subaru Legacy and Outback models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Subaru Legacy and Outback models – verify position before ordering.
- Confirm the 25-spline count on the axle shaft matches this hub before installation.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Subaru factory specifications for the Legacy and Outback – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
