Wheel Hub 512283
The DUHUI Bearing 512283 wheel hub is a direct OE-replacement assembly designed for Toyota Highlander and Lexus RX330, RX350, and RX400h models from 2004 through 2007. This rear wheel hub bearing matches OE references including 512283, BR930377, and RW8283, and is engineered for rear right axle applications on these SUV and crossover platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1184 |
| Part Number | 512283 |
| Position | Rear Axle (Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Flange Offset | 72.10 mm (2.839 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 62.00 mm (2.441 inch) |
| Hub Pilot Diameter | 83.80 mm (3.299 inch) |
| Wheel Pilot Diameter | 60.00 mm (2.362 inch) |
| Hub Bolt Circle Diameter | 110.60 mm (4.354 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1184
OE Numbers: 512283, RW8283, BR930377, 424100E010, 424100E020, 4241048080, 4241048090, 4246048010
Reference Numbers (Interchange):
SKF: BR930377
Timken: HA590144
NTN: WE60824
MOOG: 512283
Mevotech: H512283
BCA: 512283
GMB: 725-3280
Vehicle Fitment
Toyota: Highlander (2004-2007)
Lexus: RX330 (2004-2006), RX350 (2007), RX400h (2006-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 152.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Toyota Highlander and Lexus RX models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear right axle applications on Toyota Highlander and Lexus RX models – verify position before ordering.
- Confirm the 5-stud flange pattern and 152.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
