Wheel Hub 512233
The DUHUI Bearing 512233 wheel hub is a direct OE-replacement assembly designed for Volvo S60, S80, and V70 models from 1999 through 2009. This rear wheel hub bearing matches OE references including 9173872 and 91738720. It features a Gen 3 hub unit design with 5 wheel studs, 4 flange bolt holes, and an offset trapezoid flange shape, engineered for rear axle applications on these FWD sedan and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1139 |
| Part Number | 512233 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 68.00 mm (2.677 inch) |
| Outside Diameter | 135.60 mm (5.339 inch) |
| Flange Diameter | 135.60 mm (5.339 inch) |
| Flange Offset | 58.80 mm (2.315 inch) |
| Bolt Circle Diameter | 108.00 mm (4.252 inch) |
| Wheel Pilot Diameter | 65.00 mm (2.559 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 50.60 mm (1.992 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M14 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | 12.70 mm |
| Flange Shape | Offset Trapezoid |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1139
OE Numbers: 9173872, 91738720, 91738724
Reference Numbers (Interchange):
SKF: BR930392
SKF: VKBA3524
Timken: HA590389
NTN: WE60680
BCA: WE60680
MOOG: 512233
Mevotech: H512233
FAG: 713660280
SNR: R174.33
GMB: 715-0317
WJB: WA512233
Beck/Arnley: 051-6192
Centric: 405.39001E
DuraGo: 295-12233
Vehicle Fitment
VOLVO: S60 (2001-2009) FWD, S80 (1999-2006) FWD, V70 (2001-2007) FWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Volvo P2 platform vehicles.
- Non-ABS design for FWD models without rear wheel speed sensor integration at the hub.
- 135.60 mm flange diameter with 5-stud wheel pattern and 108.00 mm bolt circle matches the original mounting configuration on Volvo S60, S80, and V70 rear axles.
- Offset trapezoid flange shape with 58.80 mm offset matches the OEM attachment geometry.
- 5 wheel studs with M14 x 1.5 thread and 4 flange bolt holes with 12.70 mm size ensure proper mounting.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930392, Timken HA590389, NTN WE60680, and MOOG 512233 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Volvo S60 (2001-2009), S80 (1999-2006), and V70 (2001-2007) FWD models without integrated ABS sensor.
- Confirm the 5-stud wheel pattern, offset trapezoid flange shape, and 58.80 mm flange offset match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and M14 x 1.5 wheel studs to manufacturer specifications for the Volvo P2 platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
