Wheel Hub 512209
The DUHUI Bearing 512209 wheel hub is a direct OE-replacement assembly designed for Toyota Yaris, Yaris Verso, and Echo models from 1999 through 2005. This rear wheel hub bearing matches OE references including 512209, VKBA3931, 4245052020, and HA594245, and is engineered for rear axle applications on these compact hatchback and sedan platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1118 |
| Part Number | 512209 |
| Position | Rear Axle (Left, Right) |
| Design Type | Gen 3 Hub Assembly |
| Flange Diameter | 135.00 mm (5.315 inch) |
| Flange Offset | 54.50 mm (2.146 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 55.00 mm (2.165 inch) |
| Hub Pilot Diameter | 67.00 mm (2.638 inch) |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Shape | Offset Trapezoid |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1118
OE Numbers: 512209, 4245052020, 4245052021, 424500D010, 424500D030, VKBA3931, HA594245
Reference Numbers (Interchange):
SKF: VKBA3931
Timken: HA594245
FAG: 713618680
SNR: R169.51
MOOG: 512209
Optimal: 982195
Vehicle Fitment
Toyota: Yaris Hatchback (SCP1_, NLP1_, NCP1_) (1999-2005), Yaris Hatchback (CP10) (2005-), Yaris Verso (NCP2, NLP2) (1999-2005), Echo (2000-2005)
Scion: xA (2004-2006), xB (2004-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 135.00 mm flange diameter with 4-stud offset trapezoid flange pattern matches the original mounting configuration on Toyota Yaris, Yaris Verso, Echo, and Scion xA, xB models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Roll-form design ensures consistent and optimal preload.
- Premium quad-lip seal design ensures maximum protection from contamination.
Installation Notes
- This hub is for rear axle applications on Toyota Yaris, Yaris Verso, Echo, and Scion xA, xB models with ABS – verify your brake configuration before ordering.
- Confirm the 4-stud offset trapezoid flange pattern and 135.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Toyota factory specifications for the specific model – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
