Wheel Hub 512175
The DUHUI Bearing 512175 wheel hub is a direct OE-replacement assembly designed for Honda Civic and Acura EL models from 1999 through 2006. This rear wheel hub bearing matches OE references including 512175, VKBA6834, 42200S5A008, and BR930255, and is engineered for rear axle applications on these sedan and hatchback platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1085 |
| Part Number | 512175 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 55.90 mm (2.201 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Pilot Diameter | 55.90 mm (2.201 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated with Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1085
OE Numbers: 512175, 42200S5A008, 42200-S5A-008, 42200-S5A-J51, 42200-S5D-A51
Reference Numbers (Interchange):
SKF: BR930255
Timken: HA590078
NTN: WE60523
MOOG: 512175
Mevotech: H512175
BCA: 512175
GMB: 735-0109
Vehicle Fitment
Honda: Civic Hatchback (EU_, EP_) (1999-2006), Civic Sedan (2000-2006), Civic (2001-2005) EX
Acura: EL (2001-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated tone ring ABS sensor provides wheel speed signal directly from the hub assembly.
- 139.00 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Honda Civic and Acura EL models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic and Acura EL models – verify position before ordering.
- Confirm the 4-stud flange pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Civic and EL – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
