Wheel Hub 512158
The DUHUI Bearing 512158 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Galant models from 1987 through 1993. This rear wheel hub bearing matches OE references including 512158, BR930238, and MB584325, and is engineered for rear axle applications on these sedan and hatchback platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1068 |
| Part Number | 512158 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 64.70 mm (2.547 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 67.00 mm (2.638 inch) |
| Hub Pilot Diameter | 77.00 mm (3.031 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1068
OE Numbers: 512158, BR930238, MB584325, MB584326, MB584750, MB809357, MR130728
Reference Numbers (Interchange):
SKF: BR930238
Timken: HA590101
NTN: WE60433
MOOG: 512158
Mevotech: H512158
BCA: 512158
GMB: 730-0070
Vehicle Fitment
Mitsubishi: Galant Hatchback (E3_A) (1988-1992), Galant Sedan (E3_A) (1987-1993)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 2 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 140.00 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Mitsubishi Galant E3_A models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Galant E3_A models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi factory specifications for the Galant – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
