Wheel Hub 512144
The DUHUI Bearing 512144 wheel hub is a direct OE-replacement assembly designed for Honda Prelude models from 1997 through 2001. This rear wheel hub bearing matches OE references including 42200-S30-C51 and 42200-S30-J51. It features a Gen 2 hub unit design with 5 wheel studs and an integrated ABS tone ring sensor, engineered for rear axle applications on this sport coupe platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1055 |
| Part Number | 512144 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 64.08 mm (2.523 inch) |
| Outside Diameter | 151.70 mm (5.972 inch) |
| Flange Diameter | 151.89 mm (5.980 inch) |
| Flange Offset | 55.88 mm (2.200 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.08 mm (2.523 inch) |
| Brake Pilot Diameter | 64.10 mm (2.524 inch) |
| Hub Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1055
OE Numbers: 42200-S30-C51, 42200-S30-J51, 42200-S30-C11
Reference Numbers (Interchange):
SKF: BR930079
Timken: 512144
NTN: HUB156-39
NTN: HUB15639
BCA: 512144
MOOG: 512144
SNR: R174.76
SNR: TGB35293
GSP: 9230020
Optimal: 912296
Repco: HA4018
Protex: PHK4572
Mevotech: H512144
Centric: 406.40022
Raybestos: 712144
Quality-Built: WH512144
Duralast: DL512144
WJB: WA512144
A-Premium: APHB0667
TRQ: BHA54261
PFI: PHU2144
Vehicle Fitment
HONDA: Prelude (1997-2001) L4 2.2L, including Base, Type SH, and all trim levels
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Honda Prelude models.
- Integrated ABS tone ring sensor monitors wheel speed for anti-lock braking systems.
- 151.89 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Honda Prelude rear axles.
- 64.08 mm inside diameter and 151.70 mm outside diameter provide the correct bearing envelope for this sport coupe platform.
- 5 wheel studs with M12 x 1.5 thread and 55.88 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930079, Timken 512144, NTN HUB156-39, and MOOG 512144 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Prelude (1997-2001) models with rear ABS.
- Confirm the 5-stud wheel pattern and 114.30 mm bolt circle match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Honda Prelude platform – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
