Wheel Hub 512122
The DUHUI Bearing 512122 wheel hub is a direct OE-replacement assembly designed for Honda Accord Wagon (CB8, CC) models from 1989 through 1993 and Accord Wagon (CE) models from 1993 through 1998. This rear wheel hub bearing matches OE references including 42200-SM4-008 and 42200-SV4-N01. It features a Gen 2 hub unit design with 4 wheel studs, a 152.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these wagon platforms with rear drum brakes.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1049 |
| Part Number | 512122 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Flange Offset | 56.00 mm (2.205 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.09 mm (2.523 inch) |
| Brake Pilot Diameter | 64.09 mm (2.523 inch) |
| Hub Pilot Diameter | 71.00 mm (2.795 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1049
OE Numbers: 42200-SM4-008, 42200-SV4-N01, 42200-SM4-018, 42200-SV4-008
Reference Numbers (Interchange):
SKF: VKBA3254
SKF: BR930126
Timken: 512122
BCA: 512122
MOOG: 512122
NTN: NT512122
FAG: RW8122
GMB: 730-0393
Mevotech: H512122
Raybestos: 712122
Centric: 406.40012
WJB: WA512122
Beck/Arnley: 051-6035
Precision: 295-12122
Duralast: DL512122
Vehicle Fitment
HONDA: Accord Wagon (CB8, CC) (1989-1993) with Rear Drum Brakes, Accord Wagon (CE) (1993-1998) with Rear Drum Brakes
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Honda Accord Wagon platform.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 152.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Accord Wagon rear axles with drum brakes.
- 64.09 mm wheel pilot diameter and 64.09 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA3254, SKF BR930126, Timken 512122, and MOOG 512122 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord Wagon (CB8, CC) (1989-1993) and Accord Wagon (CE) (1993-1998) models with rear drum brakes and without rear ABS.
- Confirm the 4-stud wheel pattern and 152.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Honda Accord CB/CC/CE platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
