Wheel Hub 512119
The DUHUI Bearing 512119 wheel hub is a direct OE-replacement assembly designed for Mazda 626 (GE, GF) models from 1991 through 2002, Mazda MX-6 (GE6) models from 1991 through 1997, Mazda Xedos 6 (CA) models from 1992 through 1999, and Ford Probe models from 1993 through 1997. This rear wheel hub bearing matches OE references including GA5R-26-15X and GA2A-26-15X. It features a Gen 2 hub unit design with 5 wheel studs, a 140.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these sedan and coupe platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1046 |
| Part Number | 512119 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 59.21 mm (2.331 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 66.95 mm (2.636 inch) |
| Brake Pilot Diameter | 72.00 mm (2.835 inch) |
| Hub Pilot Diameter | 71.00 mm (2.795 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1046
OE Numbers: GA5R-26-15X, GA2A-26-15X, GA5R2615X, GA2A2615X
Reference Numbers (Interchange):
SKF: BR930280
Timken: 512119
BCA: 512119
MOOG: 512119
NTN: NT512119
FAG: RW8119
GMB: 730-0303
Mevotech: H512119
Raybestos: 712119
Centric: 406.45005
WJB: WA512119
Beck/Arnley: 051-6039
Precision: 295-12119
Duralast: DL512119
Driveworks: 512119
Vehicle Fitment
MAZDA: 626 IV Sedan (GE) (1991-1998) 1.8, 2.0, 2.5 V6, 626 IV Hatchback (GE) (1991-1998), 626 V Sedan (GF) (1997-2002) 1.8, 2.0, 2.5 V6, 626 V Hatchback (GF) (1997-2002), MX-6 Coupe (GE6) (1991-1997) 2.0, 2.5 V6, Xedos 6 Sedan (CA) (1992-1999) 1.6, 1.8, 2.0
FORD: Probe (1993-1997) 2.0, 2.5 V6, Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mazda GE, GF, and CA platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 140.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on 626, MX-6, Xedos 6, and Probe rear axles.
- 66.95 mm wheel pilot diameter and 72.00 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930280, Timken 512119, MOOG 512119, and NTN NT512119 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mazda 626 (GE, GF) (1991-2002), MX-6 (GE6) (1991-1997), Xedos 6 (CA) (1992-1999), and Ford Probe (1993-1997) models without rear ABS.
- Confirm the 5-stud wheel pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
