Wheel Hub 512106
The DUHUI Bearing 512106 wheel hub is a direct OE-replacement assembly designed for Ford Taurus and Mercury Sable models from 1990 through 2000 with rear drum brakes and non-ABS configuration. This rear wheel hub bearing matches OE references including F0DC-1104-A and F0DC1104A. It features a Gen 2 hub unit design with 5 wheel studs, a 139.50 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these sedan and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1042 |
| Part Number | 512106 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.50 mm (5.492 inch) |
| Flange Offset | 57.76 mm (2.274 inch) |
| Bolt Circle Diameter | 107.95 mm (4.250 inch) |
| Wheel Pilot Diameter | 63.26 mm (2.491 inch) |
| Brake Pilot Diameter | 64.42 mm (2.536 inch) |
| Hub Pilot Diameter | 74.00 mm (2.913 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1042
OE Numbers: F0DC-1104-A, F0DC1104A, F2DZ-1104-A, F4DZ-1104-A
Reference Numbers (Interchange):
SKF: BR930107
Timken: 512106
BCA: 512106
MOOG: 512106
NTN: NT512106
FAG: RW8106
GMB: 720-0258
Mevotech: H512106
Raybestos: 712106
Centric: 406.61008
WJB: WA512106
Beck/Arnley: 051-6125
Precision: 295-12106
Duralast: DL512106
Motorcraft: HUB-26
Vehicle Fitment
FORD: Taurus (1990-2000) with Rear Drum Brakes and Non-ABS
MERCURY: Sable (1990-2000) with Rear Drum Brakes and Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Ford Taurus platform.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 139.50 mm flange diameter with 5-stud wheel pattern and 107.95 mm bolt circle matches the original mounting configuration on Taurus rear axles with drum brakes.
- 63.26 mm wheel pilot diameter and 64.42 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930107, Timken 512106, MOOG 512106, and NTN NT512106 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Ford Taurus (1990-2000) and Mercury Sable (1990-2000) models with rear drum brakes and without rear ABS. Verify brake and ABS configuration before ordering.
- Confirm the 5-stud wheel pattern and 139.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Ford Taurus platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
