Wheel Hub 512026
The DUHUI Bearing 512026 wheel hub is a direct OE-replacement assembly designed for Hyundai Sonata Sedan (Y-2) models from 1988 through 1993, Sonata Sedan (Y-3) models from 1993 through 1998, and Sonata Sedan (EF) models from 1998 through 2005. This rear wheel hub bearing matches OE references including 52710-34700 and 52710-34501. It features a Gen 2 hub unit design with 4 wheel studs, a 139.00 mm flange diameter, and an integrated ABS tone ring, engineered for rear axle applications on these sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1025 |
| Part Number | 512026 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 59.18 mm (2.330 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1025
OE Numbers: 52710-34700, 52710-34501, 52710-34600, 52710-34800, 52710-34701
Reference Numbers (Interchange):
SKF: VKBA3264
SKF: BR930275
Timken: 512026
BCA: 512026
MOOG: 512026
SNR: R184.07
SNR: R18407
FAG: 713619450
Spidan: 27296
Ruville: 8407
Quinton Hazell: QWB1076
GSP: 9234003
Febi Bilstein: 27296
HERTH+BUSS ELPARTS: J4710505
Vehicle Fitment
HYUNDAI: Sonata I (Y-2) (1988-1993), Sonata II (Y-3) (1993-1998), Sonata III (EF) (1998-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Hyundai Sonata Y-2, Y-3, and EF platforms.
- Integrated ABS tone ring monitors wheel speed for anti-lock braking systems on vehicles with rear ABS.
- 139.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Sonata rear axles.
- 67.06 mm wheel pilot diameter and 75.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA3264, SKF BR930275, Timken 512026, and MOOG 512026 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Sonata (Y-2) (1988-1993), Sonata (Y-3) (1993-1998), and Sonata (EF) (1998-2005) models. Verify ABS configuration before ordering.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific Sonata platform. The wheel bearing nut protrusion should align with the recess on the wheel axle.
- Inspect the ABS sensor connector and tone ring for damage before installation. Maintain the proper air gap between the sensor tip and the toothed rotor surface as specified in the service manual.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
