Wheel Hub 512011
The DUHUI Bearing 512011 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Eclipse Coupe (D2_A) models from 1989 through 1995, Mitsubishi Sigma Sedan (F16A) models from 1990 through 1996, Mitsubishi Sigma Station Wagon (F07W) models from 1992 through 1996, and Eagle Talon models from 1990 through 1994 with front-wheel drive. This rear wheel hub bearing matches OE references including MB515443, MB584790, and MB948028. It features a Gen 2 hub unit design with 5 wheel studs, a 140.00 mm flange diameter, and a non-ABS configuration, engineered for rear axle applications on these coupe, sedan, and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1013 |
| Part Number | 512011 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Bolt Circle Diameter | 112.00 mm (4.409 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 88.90 mm (3.500 inch) |
| Hub Pilot Diameter | 71.00 mm (2.795 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1013
OE Numbers: MB515443, MB584790, MB948028, MB584791
Reference Numbers (Interchange):
SKF: VKBA3725
SKF: BR930270
Timken: 512011
BCA: 512011
MOOG: 512011
NTN: NT512011
FAG: RW811
KOYO: DACF1090
GMB: 735-0309
Mevotech: H512011
Raybestos: 712011
Centric: 405.46001
WJB: WA512011
Beck/Arnley: 051-6018
Precision: 295-12011
Vehicle Fitment
MITSUBISHI: Eclipse Coupe (D2_A) (1989-1995) 1.8, 2.0, 2.0 Turbo, Sigma Sedan (F16A) (1990-1996) 2.0, 3.0 V6, Sigma Station Wagon (F07W) (1992-1996) 2.0, 3.0 V6
EAGLE: Talon (1990-1994) FWD, 2-Wheel ABS, 4-Wheel ABS
PLYMOUTH: Laser (1990-1994) FWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mitsubishi D2_A, F16A, and F07W platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems at the hub.
- 140.00 mm flange diameter with 5-stud wheel pattern and 112.00 mm bolt circle matches the original mounting configuration on Eclipse, Sigma, and Talon rear axles.
- 67.06 mm wheel pilot diameter and 88.90 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA3725, SKF BR930270, Timken 512011, and KOYO DACF1090 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Eclipse (1989-1995), Sigma (1990-1996), Eagle Talon (1990-1994) FWD, and Plymouth Laser (1990-1994) FWD models without rear ABS at the hub.
- Confirm the 5-stud wheel pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
