Wheel Hub 402024U010
The DUHUI 402024U010 wheel hub is a direct OE-replacement solution designed for NISSAN Almera Tino (V10) 1.8 models from 2000 to 2006. This front axle wheel hub matches OE specification 402024U010.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2284 |
| Part Number | 402024U010 |
| Position | Front Axle |
| Inner Diameter | 27.00 mm (1.063 inch) |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Structure Height | 75.50 mm (2.972 inch) |
| Number of Fixing Holes | 5 |
| Insertion Width (Bolt Circle) | 114.30 mm (4.500 inch) |
| Number of Input Shaft Teeth | 27 |
| Thread Size | M12 x 1.25 |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2284
OE Numbers: 402024U010
Vehicle Fitment
NISSAN: Almera Tino (V10) 1.8 2000-2006
NISSAN: Primera – verify OE number for compatibility
RENAULT: Scenic – verify OE number for compatibility
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE-replacement wheel hub for NISSAN Almera Tino front axle applications.
- OE-match design with OE number 402024U010.
- 27-spline design for secure axle engagement.
- 5-bolt configuration with 114.3 mm bolt circle.
- M12 x 1.25 thread size for secure wheel bolt engagement.
- Factory pre-lubricated and sealed for extended service life.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the steering knuckle for damage before installation.
- Clean the hub mounting surface thoroughly and check for corrosion or debris.
- Torque the hub bolts and axle nut to NISSAN factory specifications.
- After installation, check for proper wheel rotation and ABS sensor clearance.
- Verify wheel alignment after installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
