Wheel Hub 333501118
The DUHUI Bearing 333501118 rear right wheel hub is a direct OE-replacement assembly designed for a wide range of Volkswagen and SEAT models spanning 1983 through 2002, including Golf, Jetta, Corrado, and multiple SEAT platforms. This rear right wheel hub bearing matches OE references 191501118B and 191501118D, delivering factory-spec performance for compact passenger car applications with ABS.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2006 |
| Part Number | 333501118 |
| Position | Rear Axle, Right |
| Diameter 1 | 29.00 mm (1.142 inch) |
| Height | 110.50 mm (4.350 inch) |
| Number of Holes | 6 |
| ABS Sensor | For Vehicles with ABS |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2006
OE Numbers: 333501118, 191501118B, 191501118D
Reference Numbers (Interchange):
SKF: VKBA 7091
Timken: HA590748
NTN: HUB236
Vehicle Fitment
Volkswagen: Corrado Coupe (53I) (1987-1995)
Volkswagen: Golf II Hatchback (19E, 1G1) (1983-1992)
Volkswagen: Golf III Hatchback (1H1) (1991-1998)
Volkswagen: Golf III Cabriolet (1E7) (1993-1998)
Volkswagen: Golf III Estate (1H5) (1993-1999)
Volkswagen: Jetta II Sedan (19E, 1G2) (1983-1992)
SEAT: Cordoba Sedan (6K2/C2) (1993-1999)
SEAT: Cordoba Vario (6K5) (1996-2002)
SEAT: Cordoba Estate (6K5) (1999-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear right wheel hub bearing engineered for multiple VW and SEAT platforms.
- 110.5mm height with 6-hole configuration matches factory rear axle specifications.
- ABS-compatible design for vehicles equipped with anti-lock braking systems.
- Direct OE cross-reference to 191501118B and 191501118D ensures accurate replacement.
- Factory-sealed bearing unit reduces contamination risk during service life.
Installation Notes
- Confirm this is a rear right (passenger side) application before installation.
- Verify diameter (29mm), height (110.5mm), 6-hole pattern, and ABS compatibility match your original bearing.
- Inspect the rear axle housing and bearing bore for wear or damage prior to fitting.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to the applicable VW or SEAT factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool if applicable.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
