Wheel Hub 1307355080
The DUHUI Bearing 1307355080 front wheel hub is a direct OE-replacement assembly designed for Peugeot Boxer, Fiat Ducato, and Citroën Jumper commercial vehicle models produced between 1994 and 2005. This front wheel hub bearing matches OE references 330766 and 485806, delivering factory-spec performance for light commercial van and truck applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2022 |
| Part Number | 1307355080 |
| Position | Front Axle |
| Diameter 1 | 55.00 mm (2.165 inch) |
| Diameter 2 | 80.00 mm (3.150 inch) |
| Height | 100.00 mm (3.937 inch) |
| Rim Hole Number | 5 |
| Number of Teeth | 35 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2022
OE Numbers: 1307355080, 330766, 485806
Reference Numbers (Interchange):
SKF: VKBA 7064
Timken: HA590717
NTN: HUB206
Vehicle Fitment
Peugeot: Boxer Box Truck (230L) (1994-2003)
Peugeot: Boxer Bus (230P) (1994-2002)
Peugeot: Boxer Truck (230) (1994-2002)
Fiat: Ducato Box Truck (230L) (1994-2005)
Fiat: Ducato Bus (230) (1994-2002)
Fiat: Ducato Truck (230) (1994-2002)
Citroën: Jumper Box Truck (230L) (1994-2002)
Citroën: Jumper Bus (230P) (1994-2002)
Citroën: Jumper Truck (230) (1994-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for commercial van and truck applications across Peugeot, Fiat, and Citroën.
- 100mm height with dual diameter design (55mm/80mm) matches factory heavy-duty specifications.
- 5-stud configuration with 35-tooth count fits original hub and axle interface.
- Direct OE cross-reference to 330766 and 485806 ensures accurate replacement.
- Factory-sealed bearing unit reduces contamination risk during service life.
Installation Notes
- Confirm diameters (55mm and 80mm), height (100mm), 5-stud pattern, and 35-tooth count match your original bearing before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to the applicable vehicle manufacturer specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
