Wheel Bearing Kits VKBA1367 For MITSUBISHI
The DUHUI Bearing VKBA1367 rear wheel bearing kit (DBK048) is a direct-fit OE replacement kit designed for the rear axle of 1986-1988 Mitsubishi Colt II (C1_A) models. This rear wheel bearing kit includes two bearings, an oil seal, and a retaining nut for a complete and secure installation. Manufactured to match original equipment specifications including Mitsubishi part number MB242820, this wheel bearing kit delivers reliable performance for these classic compact car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK048 |
| Part Number | VKBA1367 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Bearing × 2, Oil Seal × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK048
OE Numbers:
VKBA1367, MB242820, ADC48303, BK476, J4715003, QWB803, R173.09, 952710
Reference Numbers (Interchange):
SKF: VKBA1367
SNR: R173.09
Mitsubishi: MB242820
Vehicle Fitment
MITSUBISHI COLT II (C1_A): 1986–1988
1.2 EL, GL (C15A) – 1986-1988
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes two bearings, one oil seal, and one retaining nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi Colt II. Matches OE specification MB242820.
- Complete wheel bearing kit includes two bearings, oil seal, and retaining nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of classic compact car applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1986-1988 Mitsubishi Colt II before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the oil seal is properly seated during installation.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
