Wheel Bearing Kits VKBA6964 For MITSUBISHI
The DUHUI Bearing VKBA6964 rear wheel bearing kit (DB1097) is a direct-fit OE replacement kit designed for the rear axle of 2011-2015 Mitsubishi L200 / Triton (KA_T, KB_T) pickups . This rear wheel bearing kit includes two bearings, two shaft seals, and an O-ring for a complete installation . Manufactured to match original equipment specifications including SKF VKBA6964 and ADC48359, this wheel bearing kit delivers reliable performance for these pickup applications .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DB1097 |
| Part Number | VKBA6964 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Inner Diameter | 40.00 mm (1.575 in) |
| Outer Diameter | 80.00 mm (3.150 in) |
| Width | 45.00 mm (1.772 in) |
| Width 2 | 44.00 mm (1.732 in) |
| Kit Contents | Bearing × 2, Shaft Seal × 2, O-Ring × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DB1097
OE Numbers:
VKBA6964, J4715022, 713626760, ADC48359
Reference Numbers (Interchange):
SKF: VKBA6964
NSK: ZA-40KWD02
ADC48359
Vehicle Fitment
MITSUBISHI L200 / TRITON (KA_T, KB_T): 2011–2015
2.5 DI-D (4D56, 4D56-HP) – 4WD – 2011-2015
2.5 TD (4D56-TD) – 4WD – 2011-2015
2.4 (4G64) – 4WD – 2011-2015
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearings, shaft seals, and O-ring for complete installation .
– Compatible with ABS and non-ABS variants .
– Width dimensions may vary between 44 mm and 45 mm for different applications – verify your original bearing width before ordering .
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi L200 / Triton. Matches OE specifications VKBA6964 and ADC48359 .
- Complete wheel bearing kit includes two bearings, two shaft seals, and one O-ring for a hassle-free installation .
- Double-row design provides stable load distribution for pickup applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Includes all necessary components for a complete rear wheel bearing replacement.
Installation Notes
- Verify your vehicle is a 2011-2015 Mitsubishi L200 / Triton (KA_T, KB_T) before ordering.
- Compare inner diameter (40.00 mm), outer diameter (80.00 mm), and width against your original bearing before installing .
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure both shaft seals are properly seated during installation .
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
