Wheel Bearing Kits VKBA6840 For Hyundai
The DUHUI Bearing VKBA6840 wheel bearing kit is a rear axle hub assembly designed specifically for the 2001-2006 Hyundai Elantra (XD) without ABS. This comprehensive kit includes a pre-assembled hub unit, providing a complete solution for rear wheel bearing replacement. It matches OE specification 52710-2D010 and is cross-referenced with SKF VKBA6840 and SNR R184.25.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK788 |
| Part Number | VKBA6840 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Rear Axle (Left/Right) |
| Kit Contents | 1 Hub Unit with Bearing |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Wheel Stud Quantity | 4 |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| ABS Sensor | Not Included (Non-ABS Model) |
| Material | GCr15 Bearing Steel (SAE52100) |
| Weight | 2.31 kg (5.09 lb) |
Note: Dimensional data is based on SKF and manufacturer published specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK788
OE Numbers:
52710-2D010
Reference Numbers (Interchange):
SKF: VKBA6840
SNR: R184.25
MOOG: HY-WB-11831
PRORUN: K60785
OPTIMAL: 9232044K
Vehicle Fitment
HYUNDAI ELANTRA III (XD): 1.6, 1.8, 2.0, 2.0 CRDi (2000-2006) – Without ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes a pre-assembled hub unit with integrated bearing – all components needed for a full hub replacement on non-ABS Hyundai Elantra models.
- Designed specifically for Hyundai Elantra (XD) rear axle applications without ABS – verified fitment for 2000-2006 model years.
- 4-bolt flange configuration with 139 mm flange diameter and 32 mm inner diameter matches OE specifications for direct fitment.
- Constructed from high-grade GCr15 (SAE52100) bearing steel with 55# steel flange material – raceway hardness control of 60-65 HRC.
- Pre-greased and pre-assembled hub unit simplifies installation, requiring no shims or complex adjustments.
- Cross-referenced with major aftermarket brands including SKF VKBA6840 and SNR R184.25 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (32 mm) and flange diameter (139 mm).
- This kit is designed for non-ABS Hyundai Elantra models – do not use on vehicles equipped with ABS as this unit does not include an ABS sensor ring.
- The hub assembly is pre-assembled with integrated bearing – handle with care to avoid contamination or damage to the bearing surfaces.
- Inspect the axle shaft and hub surface for wear or damage before installing new components.
- Torque the securing nut and wheel bolts to Hyundai service manual specifications for the XD chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
