Wheel Bearing Kits VKBA3712 For Hyundai
The DUHUI Bearing VKBA3712 wheel bearing kit is a rear axle replacement kit designed for Hyundai H-1 / Starex (A1) and compatible Hyundai Galloper models. This comprehensive kit includes one bearing, two shaft seals, and one washer, providing all components needed for a complete rear wheel bearing replacement. The kit matches OE specifications including 52701-43310, 0K72A-26151, and AUB84, with cross-references to SKF VKBA3712.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK1081 |
| Part Number | VKBA3712 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Rear Axle |
| Kit Contents | 1 Bearing, 2 Shaft Seals, 1 Washer |
| Inner Diameter | 39.70 mm (1.563 inch) |
| Outer Diameter | 73.00 mm (2.874 inch) |
| Width | 19.40 mm (0.764 inch) |
| Width 1 | 22.10 mm (0.870 inch) |
Note: Dimensional data is based on SKF and FAG published specifications for the VKBA3712 series.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1081
OE Numbers:
52701-43310, 52701-43300, 52701-43320, 0K72A-26151, OK72A-26-151, AUB84
Reference Numbers (Interchange):
SKF: VKBA3712
FORD: AUB84
TRISCAN: 8530 42105
Vehicle Fitment
HYUNDAI H-1 / STAREX Bus (A1): 2.4 (1997-2000), 2.5 D, 2.5 TD, 2.5 CRDi
HYUNDAI H-1 / STAREX Van: 1997-2004
HYUNDAI GALLOPER (JK-01): 2.5 TCi D, 2.5 TD, 3.0 V6 (2000-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, two shaft seals, and washer – all components needed for a full hub rebuild on Hyundai H-1 / Starex and Galloper models.
- Designed specifically for rear axle applications on compatible Hyundai vehicles – verified fitment for 1997-2004 model years.
- Precision-engineered bearing with 39.7 mm inner diameter and 73 mm outer diameter – matches OE specifications for direct replacement.
- Cross-referenced with SKF VKBA3712 and major aftermarket brands – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (39.70 mm) and outer diameter (73.00 mm).
- This kit is designed for rear axle fitment on Hyundai H-1 / Starex and compatible Galloper models – confirm placement before ordering.
- Inspect the axle shaft and hub surface for wear or damage before installing new components.
- Replace both included shaft seals during installation to prevent lubricant leakage and contamination.
- Torque all fasteners to Hyundai service manual specifications for the A1 chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
