Wheel Bearing Kits VKBA3690 For CITROËN
The DUHUI VKBA3690 wheel bearing kit is a direct-fit front axle replacement designed for Citroën Jumper Platform/Chassis models from 2004 to 2006. This front wheel bearing kit meets OE specifications VKBA3690, R141.03, and 713690940, and includes bearing, nut, and circlip for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK491 |
| Part Number | VKBA3690 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Nut x1, Circlip x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK491
OE Numbers: VKBA3690, R141.03, 713690940, 1346650080, 332669, 1606374980
Reference Numbers (Interchange):
SKF: VKBA3690
R141.03: R141.03
Vehicle Fitment
CITROËN: Jumper Platform/Chassis (244) 2.8 HDi (2004-2006)
CITROËN: Jumper 2.2 HDi, 2.8 HDi (2004-2006)
PEUGEOT: Boxer Platform/Chassis (2004-2006)
FIAT: Ducato Platform/Chassis (2004-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën Jumper – includes bearing, nut, and circlip
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3690 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3690 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën Jumper model (2004-2006)
- This is a complete kit – replace bearing, nut, and circlip as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
