Wheel Bearing Kits VKBA3679 For CITROËN
The DUHUI VKBA3679 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën Jumper Bus 4×4 models from 1996 to 2002. This rear wheel bearing kit meets OE specifications VKBA3679, R159.52, and 713690960, and includes bearing, nut, and circlip for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK482 |
| Part Number | VKBA3679 |
| Position | Rear Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Nut x1, Circlip x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK482
OE Numbers: VKBA3679, R159.52, 713690960, 332666, 71728975, 5860
Reference Numbers (Interchange):
SKF: VKBA3679
R159.52: R159.52
Vehicle Fitment
CITROËN: Jumper Bus (230P) 1.9 TD 4×4 (1996-2002)
CITROËN: Jumper 1.9 TD, 2.0, 2.5 TD (1996-2002)
PEUGEOT: Boxer Bus (1996-2002)
FIAT: Ducato Bus (1996-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën Jumper – includes bearing, nut, and circlip
- Designed for 4×4 models
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3679 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3679 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën Jumper 4×4 model (1996-2002)
- This is a complete kit – replace bearing, nut, and circlip as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
