Wheel Bearing Kits VKBA3538 For CITROËN
The DUHUI VKBA3538 wheel bearing kit is a direct-fit front axle replacement designed for Citroën Nemo MPV models from 2008 to 2017. This front wheel bearing kit meets OE specifications VKBA3538, R158.44, and 713690750, and includes bearing, circlip, and nut for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK356 |
| Part Number | VKBA3538 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 65.00 mm (2.559 inch) |
| Width | 35.00 mm (1.378 inch) |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK356
OE Numbers: VKBA3538, R158.44, 713690750, 332676, 71714459, 332672, 46773660, 55703170, 46527732, 5844
Reference Numbers (Interchange):
SKF: VKBA3538
R158.44: R158.44
Vehicle Fitment
CITROËN: Nemo MPV (2008-2017)
PEUGEOT: Bipper (2008-2017)
OPEL: Combo D (2012-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën Nemo and compatible models – includes bearing, circlip, and nut
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3538 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3538 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën Nemo model (2008-2017)
- This is a complete kit – replace bearing, circlip, and nut as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
