Wheel Bearing Kits VKBA3490 For CITROËN
The DUHUI VKBA3490 wheel bearing kit is a direct-fit front axle replacement designed for Citroën XM Break (Y4) 2.5 TD models from 1994 to 2000. This front wheel bearing kit meets OE specifications VKBA3490 and 335031, and includes bearing, circlip, and split pin for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK319 |
| Part Number | VKBA3490 |
| Position | Front Axle |
| Inner Diameter | 45.00 mm (1.772 inch) |
| Outer Diameter | 84.00 mm (3.307 inch) |
| Width | 39.00 mm (1.535 inch) |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK319
OE Numbers: VKBA3490, 335031
Reference Numbers (Interchange):
SKF: VKBA3490
SNR: R166.28
RUVILLE: 6628
SPIDAN: 27139
OPTIMAL: 601323
DELPHI: BK1255
QUINTON HAZELL: QWB790, QWB1336
FAG: 713630060
NK: 751908
FIRST LINE: FBK728
Vehicle Fitment
CITROËN: XM Break (Y4) 2.5 TD (1994-2000)
CITROËN: XM (Y4) 2.0 i 16V, 2.0 Turbo, 3.0 V6, 2.1 TD (1994-2000)
PEUGEOT: 605, 607
Note: This bearing kit is for vehicles produced from June 1997 onwards with front axle fitment.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën XM Break – includes bearing, circlip, and split pin
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3490 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3490 or 335031 before installation
- Confirm front axle fitment for your specific Citroën XM Break model (1994-2000)
- This is a complete kit – replace bearing, circlip, and split pin as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
