Wheel Bearing Kits VKBA3430 For CITROËN
The DUHUI VKBA3430 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën Jumper Bus (230P) 2.8 HDi models from 2000 to 2002. This rear wheel bearing kit meets OE specifications VKBA3430, R140.96, and 713650430, and includes two bearings, nut, and oil seal for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK263 |
| Part Number | VKBA3430 |
| Position | Rear Axle |
| Kit Contents | Bearing x2, Nut x1, Oil Seal x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK263
OE Numbers: VKBA3430, 19816505, 373022, 373518, 5516010506, 7703090085, 94020002, 335026
Reference Numbers (Interchange):
SKF: VKBA3430
SNR: R140.96
FAG: 713650430
QUINTON HAZELL: QWB1340
DELPHI: BK1290
OPTIMAL: 602366
SPIDAN: 26929
RUVILLE: 5932
NK: 751777
Vehicle Fitment
CITROËN: Jumper Bus (230P) 2.8 HDi (2000-2002)
CITROËN: Jumper 2.2 HDi, 2.8 HDi (2000-2002)
PEUGEOT: Boxer Bus (2000-2002)
FIAT: Ducato Bus (2000-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën Jumper – includes two bearings, nut, and oil seal
- Comprehensive kit designed for full axle rebuild applications
- Includes oil seal for complete sealing protection
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3430 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3430 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën Jumper model (2000-2002)
- This is a complete kit – includes two bearings, nut, and oil seal for full axle service
- Install new oil seal carefully to prevent leaks – apply a thin coat of grease to seal lips
- Clean the axle housing thoroughly before fitting the new bearings
- Use proper bearing installation tools – do not strike the bearings directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
