Wheel Bearing Kits VKBA3423 For CITROËN
The DUHUI VKBA3423 wheel bearing kit is a direct-fit front axle replacement designed for Citroën Evasion MPV models from 1997 to 2002. This front wheel bearing kit meets OE specifications VKBA3423, R159.31, and 713630580, and includes bearing, circlip, and split pin for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK256 |
| Part Number | VKBA3423 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK256
OE Numbers: VKBA3423, 335027, 332640, 335091, 9567217680, 1330512080, 71714473, 1311506080
Reference Numbers (Interchange):
SKF: VKBA3423
SNR: R159.31
FAG: 713630580
QUINTON HAZELL: QWB1337
DELPHI: BK1290
OPTIMAL: 602366
SPIDAN: 5997
NK: 751808
FIRST LINE: FBK736
Vehicle Fitment
CITROËN: Evasion MPV (22, U6) 1.8 (1997-2002)
CITROËN: Evasion 2.0, 2.1 TD (1997-2002)
PEUGEOT: 806 (1997-2002)
FIAT: Ulysse (1997-2002)
LANCIA: Zeta (1997-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën Evasion – includes bearing, circlip, and split pin
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3423 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3423 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën Evasion model (1997-2002)
- This is a complete kit – replace bearing, circlip, and split pin as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
