Wheel Bearing Kits VKBA3210 For MAZDA
The DUHUI Bearing VKBA3210 rear wheel bearing kit (DBK169) is a direct-fit OE replacement kit designed for the rear axle of the 1987-1991 Mazda 929 III (HC). This rear wheel bearing kit includes the bearing, circlip, and retaining nut for a complete installation. Manufactured to match original equipment (OE) specifications, this wheel bearing kit delivers reliable performance for this classic sedan application.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK169 |
| Part Number | VKBA3210 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Inner Diameter | 45.00 mm (1.772 in) |
| Outer Diameter | 80.00 mm (3.150 in) |
| Width | 35.00 mm (1.378 in) |
| Kit Contents | Bearing × 1, Circlip × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK169
OE Numbers:
VKBA3210, 51878320, 713615620, 7028, 0026949
Reference Numbers (Interchange):
SKF: VKBA3210
FAG: 713615620
Vehicle Fitment
MAZDA 929 III (HC): 1987–1991
2.0 (HCEP) – 1987-1989
2.2 12V – 1989-1991
3.0 (HCSS) – 1987-1991
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, circlip, and nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda 929 III (HC). Matches OE specifications 51878320 and 713615620.
- Complete wheel bearing kit includes bearing, circlip, and retaining nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of full-size sedan applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1987-1991 Mazda 929 III (HC) before ordering.
- Compare inner diameter (45.00 mm), outer diameter (80.00 mm), and width (35.00 mm) against your original bearing before installing.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the circlip is properly seated before torqueing the axle nut to manufacturer specification.
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
