Wheel Bearing Kits VKBA1948 For MAZDA
The DUHUI Bearing VKBA1948 rear wheel bearing kit (DBK138) is a direct-fit OE replacement kit designed for the rear axle of select Mazda 626 (GF platform), Capella, and Ford Telstar models from 1997 to 2002. This rear wheel bearing kit includes the bearing, oil seal, circlip, and retaining nut for a complete installation. Manufactured to match original equipment (OE) specifications including Mazda part number FB01-26-151A, this wheel bearing kit delivers reliable performance for these mid-size sedan and hatchback applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK138 |
| Part Number | VKBA1948 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Bearing × 1, Oil Seal × 1, Circlip × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK138
OE Numbers:
VKBA1948, 0K2JT33047, FB01-26-151A, BRT1366, WBK-4504, QWB919
Reference Numbers (Interchange):
SKF: VKBA1948
Vehicle Fitment
MAZDA 626 V (GF): 1997–2002
1.8 (GF8P) – 1999-2002
2.0 (GFFP) – 1997-2002
2.5 (GFS9) – 1997-2002
MAZDA CAPELLA (GF): 1997–2002
1.8, 2.0 – all variants
FORD TELSTAR (GF): 1997–2002
1.8, 2.0 – all variants
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, oil seal, circlip, and nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda 626, Capella, and Ford Telstar. Matches OE specification FB01-26-151A.
- Complete wheel bearing kit includes bearing, oil seal, circlip, and retaining nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of mid-size sedan applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1997-2002 Mazda 626, Capella, or Ford Telstar before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the oil seal and circlip are properly seated during installation.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
