Wheel Bearing HM803149/11
The DUHUI Bearing HM803149/11 is a single-row tapered roller bearing with a 44.45 mm inner diameter, 88.90 mm outer diameter, and 30.16 mm total width. This automotive wheel bearing is designed for combined radial and axial loads and is commonly used in differential pinion applications on commercial vehicles, including DAF, Leyland, and ERF trucks. It matches OE specification HM803149/11 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2554 |
| Part Number | HM803149/11 |
| Product Type | Single Row Tapered Roller Bearing |
| Inner Diameter (d) | 44.45 mm (1.750 inch) |
| Outer Diameter (D) | 88.90 mm (3.500 inch) |
| Cone Width (B) | 29.37 mm (1.156 inch) |
| Cup Width (C) | 23.02 mm (0.906 inch) |
| Total Width (T) | 30.16 mm (1.187 inch) |
| Weight | 0.85 kg (1.87 lb) |
| Bearing Inner Ring | HM803149 |
| Bearing Outer Ring | HM803111 |
| Design | TS Series – Single Row Tapered |
| Bearing Material | Case Carburized Steel |
| Cage Material | Pressed Steel Cage |
| Dynamic Load Rating (C1) | 105.0 kN |
| Static Load Rating (C0) | 144.0 kN |
| ISO Factor (e) | 0.55 |
| Axial Factor (Y) | 1.10 |
| Temperature Range | -40°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications. The bearing inner ring is HM803149 and the outer ring is HM803111. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2554
OE Numbers:
HM803149/11
Reference Numbers (Interchange):
TIMKEN: HM803149/HM803111
NTN: HM803149/11
KOYO: HM803149/11
Vehicle Fitment
Please verify OE number, dimensions and vehicle configuration before ordering. Fitment data is not available for this part number.
Typical Applications: Differential pinion assemblies on DAF, Leyland, and ERF commercial vehicles, as well as industrial gearboxes requiring high radial and axial load capacity.
Product Features
- Single-row tapered roller bearing design accommodates high radial and axial loads in one direction. The conical raceways allow these versatile bearings to support combined loads effectively.
- Separable cone and cup components simplify mounting, dismounting, and maintenance. The cone unit consists of an inner ring with cage and roller set, while the cup is the outer ring.
- Manufactured to OE specifications with case carburized steel for durability and fatigue resistance.
- Pressed steel cage provides reliable roller guidance under load.
- Direct interchange with multiple major brand equivalents including TIMKEN HM803149/HM803111 for straightforward replacement.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm inner diameter (44.45 mm) and outer diameter (88.90 mm) match your housing and shaft before installation.
- This is a single-row tapered roller bearing – these bearings must be mounted in mirror-image arrangement together with a second tapered roller bearing. Paired bearing sets can be applied in X, O, or tandem arrangements.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the cone onto the shaft and the cup into the housing – never apply force directly through the rolling elements.
- Proper bearing preload is critical for tapered roller bearings – refer to the vehicle service manual for torque specifications.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
