Wheel Bearing DAC43820045-2RZ
The DUHUI Bearing DAC43820045-2RZ double-row wheel bearing is an OE-replacement solution for the Toyota Camry (_V1_) 1.8 (SV30) and a wide range of other Toyota and Lexus models. This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including DAC43820045-2RZ and BCA 510006, this wheel bearing delivers reliable performance for compatible Toyota and Lexus vehicles .
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0133 | |
| Part Number | DAC43820045-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 43.00 mm | 1.693 in |
| Outer Diameter | 82.00 mm | 3.228 in |
| Width | 45.00 mm | 1.772 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
| ABS Sensor | Not Included | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0133
OE Numbers:
90080-36021, 90369-43008, 90369-43009, 90080-36078
Reference Numbers (Interchange):
BCA: 510006
Timken: 510006
SKF: FW153, VKBA3237, VKBA3945
FAG: 713618170
Moog: 510006
National: 510006
GMB: 7700357
NSK: 30BWK10
SNR: R169.20
Beck/Arnley: 051-4119, 514119
Centric: 41244003
Quinton Hazell: QWB899
Febi-Bilstein: 27313
FEBEST: DAC43820045
Vehicle Fitment
TOYOTA CAMRY (_V1_): 1.8 (SV30) 1990-1994
Additional compatible models (verify before ordering):
TOYOTA: Camry 2.2 (SXV10) 1992-1997, Camry 3.0 (VCV10) 1991-1996, Avalon (1995-2004), Sienna (1998-2003), Solara (1999-2003), RAV4 (2001-2005), MR2 (1991-1995)
LEXUS: ES300 (1992-2003), RX300 (1999-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel for durability under load.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Interchangeable with BCA 510006 and Timken 510006.
Installation Notes
- Confirm inner diameter is 43.00 mm (1.693 in), outer diameter is 82.00 mm (3.228 in), and width is 45.00 mm (1.772 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Toyota service manual).
- Verify fitment for your specific Toyota or Lexus model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
