Wheel Bearing DAC43790041/38-2RZ
The DUHUI Bearing DAC43790041/38-2RZ double-row wheel bearing is an OE-replacement solution for the Honda Civic V Coupe (EJ2) from 1993 to 1995, as well as other compatible Honda applications. This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including DAC43790041/38-2RZ and BCA 510030, this wheel bearing delivers dependable performance for compatible Honda vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0127 | |
| Part Number | DAC43790041/38-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 43.00 mm | 1.693 in |
| Outer Diameter | 79.00 mm | 3.110 in |
| Width (B) | 41.00 mm | 1.614 in |
| Width (C) | 38.00 mm | 1.496 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
| Weight | 0.77 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0127
OE Numbers:
DAC43790041/38-2RZ
Reference Numbers (Interchange):
BCA: 510030
SKF: VKBA3205
SNR: R169.34
FAG: 713614770
Vehicle Fitment
HONDA CIVIC V Coupe (EJ): 1.5 i LSi (EJ2) 1993-1995
Additional compatible models (verify before ordering):
HONDA: Civic V (EG) 1992-1995, Civic VI (EK) 1996-2000
Engine Compatibility: D15B7 1.5L (74 kW / 99 hp), D16Z6 1.6L (92 kW / 125 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 510030, SKF VKBA3205, and SNR R169.34.
Installation Notes
- Confirm inner diameter is 43.00 mm (1.693 in), outer diameter is 79.00 mm (3.110 in), and width is 41.00 mm (1.614 in) before installation.
- This is a double-row bearing with no pre-load or alignment adjustments required during installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Honda service manual).
- Verify fitment for your specific Honda Civic model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
