Wheel Bearing DAC40720037-2RS
The DUHUI Bearing DAC40720037-2RS double-row wheel bearing is an OE-replacement solution for the Seat Cordoba (6K1, 6K2) from 2001 to 2002, as well as other compatible Volkswagen Group vehicles. This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention . Manufactured to match original equipment specifications including DAC40720037-2RS and BCA 510004, this wheel bearing delivers reliable performance for compatible VW Group vehicles .
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0065 | |
| Part Number | DAC40720037-2RS | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 40.00 mm | 1.575 in |
| Outer Diameter | 72.00 mm | 2.835 in |
| Width | 37.00 mm | 1.457 in |
| Seal Type | 2RS (Double Rubber Seal) | |
| ABS Sensor | Not Included | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0065
OE Numbers:
DAC40720037-2RS, 191.498.625A, 331.598.625A, 331.598.625B, 357.498.625, 357.498.625B, 357498625C
Reference Numbers (Interchange):
BCA: 510004
Timken: 510004
SKF: VKBA1358
SNR: R154.28, R154.38
FAG: 713615070
OPTIMAL: 100022, 100022S
QUINTON HAZELL: QWB698, QWB823
RUVILLE: 220241, 220577, 5428, 5438, 5479
TRISCAN: 8530 10124, 8530 10124A
SWAG: 30 90 3662, 30 90 5379
TOPRAN: 103 037, 103 510
SIDAT: 460062
SPIDAN: 26679
PEX: 16.0295
Vehicle Fitment
SEAT CORDOBA (6K1, 6K2): 1.0 2001-2002
Additional compatible models (verify before ordering):
VW: Golf III (1991-1997), Golf IV (1997-2003), Bora (1998-2005), Polo (1994-2001), Caddy II (1996-2004)
SEAT: Ibiza (6K) 1993-2002, Toledo I (1991-1998)
AUDI: A3 8L (1996-2003), A4 B5 (1994-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life .
- 2RS rubber seals on both sides provide excellent contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load .
- Precision-ground raceways ensure smooth rotation and precise wheel guidance .
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 510004 and Timken 510004.
Installation Notes
- Confirm inner diameter is 40.00 mm (1.575 in), outer diameter is 72.00 mm (2.835 in), and width is 37.00 mm (1.457 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the vehicle service manual).
- Verify fitment for your specific VW Group model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
