Wheel Bearing DAC39720037-2RS
The DUHUI Bearing DAC39720037-2RS double-row wheel bearing is an OE-replacement solution for the BMW 3-Series (E30) from 1987 to 1988, the Opel Ascona C from 1981 to 1987, and the Ford Escort Classic from 1998 to 2000. This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including BCA 513113, this wheel bearing delivers dependable performance for compatible vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0057 | |
| Part Number | DAC39720037-2RS | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 39.00 mm | 1.535 in |
| Outer Diameter | 72.00 mm | 2.835 in |
| Width | 37.00 mm | 1.457 in |
| Seal Type | 2RS (Double Rubber Seal) | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0057
OE Numbers:
DAC39720037-2RS
Reference Numbers (Interchange):
BCA: 513113
SKF: VKBA3150
FAG: 713613530
FEBEST: DAC39720037
Vehicle Fitment
BMW 3-SERIES (E30): 316 i 1987-1988
FORD ESCORT CLASSIC (AAL, ABL): 1.8 TD 1998-2000
OPEL ASCONA C (J82): 1.6 (F11, M11, F68, M68) 1981-1987
Additional compatible models (verify before ordering):
BMW: 3-Series E30 316i, 318i (1983-1991)
FORD: Escort V (1995-2000), Orion (1995-1998)
OPEL: Ascona C Saloon/Hatchback (1981-1988), Kadett E (1984-1991)
Engine Compatibility: M10 B18 1.8L (75 kW / 102 hp); RFD/RFK/RFS 1.8L TD (66 kW / 90 hp); 16 N 1.6L (55 kW / 75 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RS rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 513113, SKF VKBA3150, and FAG 713613530.
Installation Notes
- Confirm inner diameter is 39.00 mm (1.535 in), outer diameter is 72.00 mm (2.835 in), and width is 37.00 mm (1.457 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the vehicle service manual).
- Verify fitment for your specific BMW, Ford, or Opel model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
