Wheel Bearing DAC3941750037-2RS
The DUHUI Bearing DAC3941750037-2RS double-row wheel bearing is an OE-replacement solution for the Audi 80 B3 Saloon (893, 894, 8A2) from 1986 to 1988, and is also compatible with other Audi 80/90 B3 models . This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including BCA 510020, this wheel bearing delivers dependable performance for compatible vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0054 | |
| Part Number | DAC3941750037-2RS | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter (d) | 39.00 mm | 1.535 in |
| Inner Diameter (Alternate) | 41.00 mm | 1.614 in |
| Outer Diameter (D) | 75.00 mm | 2.953 in |
| Width (B) | 37.00 mm | 1.457 in |
| Seal Type | 2RS (Double Rubber Seal) | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0054
OE Numbers:
DAC3941750037-2RS
Reference Numbers (Interchange):
BCA: 510020
SKF: VKBA1350
FAG: 713612500
Vehicle Fitment
AUDI 80 B3 Saloon (893, 894, 8A2): 1.4 1986-1988
Additional compatible models (verify before ordering):
AUDI: 80 B3 Saloon (1986-1991), 80 B3 Avant (1988-1991), 90 B3 (1987-1991)
AUDI: 80/90 B3 1.6, 1.8, 1.9D, 2.0, 2.3 (1986-1991)
Engine Compatibility: SE 1.4L (48 kW / 65 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RS rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 510020, SKF VKBA1350, and FAG 713612500.
Installation Notes
- Confirm inner diameter matches your original bearing – verify 39 mm or 41 mm based on your specific model.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Audi service manual).
- Verify fitment for your specific Audi 80/90 B3 model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
