Wheel Bearing DAC38700037-2RZ
The DUHUI Bearing DAC38700037-2RZ double-row wheel bearing is an OE-replacement solution for the Hyundai Accent II (LC) from 2000 to 2005 and the Kia Picanto I (SA) from 2004 to 2011. This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including BCA 510055, this wheel bearing delivers dependable performance for compatible Hyundai and Kia vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0043 | |
| Part Number | DAC38700037-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter (d) | 38.00 mm | 1.496 in |
| Outer Diameter (D) | 69.00 mm | 2.717 in |
| Width (B) | 39.00 mm | 1.535 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
| Weight | 0.56 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0043
OE Numbers:
DAC38700037-2RZ, 510055
Reference Numbers (Interchange):
BCA: 510055
SKF: VKBA3728
FAG: 713618530
Vehicle Fitment
HYUNDAI ACCENT II (LC): 1.3 2000-2005
KIA PICANTO I (SA): 1.0 2004-2011
Additional compatible models (verify before ordering):
HYUNDAI: Accent II 1.5 (2000-2005)
KIA: Picanto I 1.1 (2004-2011)
Engine Compatibility: G4EA 1.3L (61 kW / 83 hp); G4HC 1.0L (53 kW / 72 hp); 1.1L (49 kW / 67 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 510055 and SKF VKBA3728.
Installation Notes
- Confirm inner diameter is 38.00 mm (1.496 in), outer diameter is 69.00 mm (2.717 in), and width is 39.00 mm (1.535 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the vehicle service manual).
- Verify fitment for your specific Hyundai or Kia model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
