Wheel Bearing DAC35720033-2RZ
The DUHUI Bearing DAC35720033-2RZ double-row wheel bearing is an OE-replacement solution for the Citroën AX (ZA-) 1.3 Sport from 1987 to 1988 and the Peugeot 106 I (1A, 1C) 1.0 KID from 1991 to 1996. This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including DAC35720033-2RZ, this wheel bearing delivers dependable performance for compatible PSA Group vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0029 | |
| Part Number | DAC35720033-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 35.00 mm | 1.378 in |
| Outer Diameter | 72.00 mm | 2.835 in |
| Width | 33.00 mm | 1.299 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0029
OE Numbers:
DAC35720033-2RZ, 3350.98, 3352.12, 3348.28
Reference Numbers (Interchange):
SKF: VKBA5863
FAG: 713632300
SNR: R169.18
Vehicle Fitment
CITROËN AX (ZA-): 1.3 Sport (ZAM4A) 1987-1988
PEUGEOT 106 I (1A, 1C): 1.0 KID 1991-1996
Additional compatible models (verify before ordering):
CITROËN: AX 1.0, 1.1, 1.4 (1986-1998), Saxo (1996-2003)
PEUGEOT: 106 1.1, 1.3, 1.4 (1991-2003), 205 (1983-1998), 306 (1993-2001)
Engine Compatibility: M4A (TU24) 1.3L (70 kW / 95 hp); CDY (TU9M) 1.0L (33 kW / 45 hp), 1.1L, 1.4L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with SKF VKBA5863, FAG 713632300, and SNR R169.18.
Installation Notes
- Confirm inner diameter is 35.00 mm (1.378 in), outer diameter is 72.00 mm (2.835 in), and width is 33.00 mm (1.299 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the vehicle service manual).
- Verify fitment for your specific Citroën or Peugeot model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
