Wheel Bearing DAC35660037-2RS
The DUHUI Bearing DAC35660037-2RS double-row wheel bearing is an OE-replacement solution for the Volkswagen Lupo I (6X1, 6E1) 1.0 from 1998 to 2000, as well as other compatible Volkswagen Golf and Jetta models. This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including BCA 513021 and SKF BAHB311309, this wheel bearing delivers dependable performance for compatible Volkswagen vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0025 | |
| Part Number | DAC35660037-2RS | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter (d) | 35.00 mm | 1.378 in |
| Outer Diameter (D) | 66.00 mm | 2.598 in |
| Width (B) | 37.00 mm | 1.457 in |
| Seal Type | 2RS (Double Rubber Seal) | |
| Weight | 0.48 kg | |
| Material | GCr15 Chrome Steel | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0025
OE Numbers:
DAC35660037-2RS, 513021
Reference Numbers (Interchange):
SKF: BAHB311309
FAG: 544307
KOYO: BAHB0023
MCB: DAC35660037 2RS
Vehicle Fitment
VOLKSWAGEN LUPO I (6X1, 6E1): 1.0 1998-2000
Additional compatible models (verify before ordering):
VOLKSWAGEN: Lupo 1.4, 1.6, 1.7 SDI (1998-2005), Golf III (1991-1997), Golf IV (1997-2003), Jetta III (1993-1999), Polo (1994-2001)
Engine Compatibility: AHT 1.0L (37 kW / 50 hp), 1.4L, 1.6L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RS rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from GCr15 high-carbon chromium bearing steel for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with SKF BAHB311309, FAG 544307, and KOYO BAHB0023.
Installation Notes
- Confirm inner diameter is 35.00 mm (1.378 in), outer diameter is 66.00 mm (2.598 in), and width is 37.00 mm (1.457 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Volkswagen service manual).
- Verify fitment for your specific Volkswagen model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
