Wheel Bearing DAC35660033-2RS
The DUHUI Bearing DAC35660033-2RS double-row wheel bearing is an OE-replacement solution for the Fiat Cinquecento (170) 0.7 from 1991 to 1996, as well as other compatible Fiat and Lancia applications. This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including DAC35660033-2RS, this wheel bearing delivers dependable performance for compatible Fiat vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0023 | |
| Part Number | DAC35660033-2RS | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 35.00 mm | 1.378 in |
| Outer Diameter | 66.00 mm | 2.598 in |
| Width | 33.00 mm | 1.299 in |
| Seal Type | 2RS (Double Rubber Seal) | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0023
OE Numbers:
DAC35660033-2RS
Reference Numbers (Interchange):
SKF: VKBA1329
FAG: 713611510
Vehicle Fitment
FIAT CINQUECENTO (170): 0.7 (170AA) 1991-1996
Additional compatible models (verify before ordering):
FIAT: Cinquecento 0.9 (1991-1998), Cinquecento 1.1 (1991-1998), Uno (1983-1995), Punto (1993-1999)
LANCIA: Y10 (1985-1995)
Engine Compatibility: 170 A.000 0.7L (23 kW / 31 hp), 0.9L, 1.1L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RS rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with SKF VKBA1329 and FAG 713611510.
Installation Notes
- Confirm inner diameter is 35.00 mm (1.378 in), outer diameter is 66.00 mm (2.598 in), and width is 33.00 mm (1.299 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Fiat service manual).
- Verify fitment for your specific Fiat or Lancia model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
