VKBA7469 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA7469 is a complete rear wheel bearing kit designed for Honda Civic four-door sedan models from 2005 onward. This kit includes one bearing, one circlip, and two retaining nuts, matching OE specifications including 44300SNA951 and 44300SNAA01. It is directly interchangeable with SKF VKBA7469, SNR R174.68, and FAG 713617880.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK916 |
| Part Number | VKBA7469 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 68.00 mm (2.677 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Nut x2 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda Civic applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK916
OE Numbers: 44300SNA951, 44300SNAA01
Reference Numbers (Interchange):
SKF: VKBA7469
SNR: R174.68
FAG: 713617880
BRT: BRT7469
RUVILLE: 7455
MOOG: 513286
Vehicle Fitment
HONDA: CIVIC four-door sedan (FD._) – 2005 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, and two retaining nuts – all components for a full bearing replacement
- Specifically engineered for Honda Civic sedan rear axle applications
- Direct interchange with SKF VKBA7469, SNR R174.68, and FAG 713617880
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and nut x2
- Confirm rear axle fitment for your specific Honda Civic sedan model (2005 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nuts supplied – do not reuse old retaining hardware
- Torque the retaining nuts to Honda service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
