VKBA7440 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA7440 is a complete front wheel bearing kit designed for Honda CR-V IV models from 2012 onward. This kit includes one bearing, one circlip, and one retaining nut, matching OE specifications including 44300SJKJ01 and 44300SWWE01. It is directly interchangeable with SKF VKBA7440, SNR R174.45, and FAG 713617910.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK906 |
| Part Number | VKBA7440 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 68.00 mm (2.677 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front Axle |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a front wheel bearing kit designed for Honda CR-V applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK906
OE Numbers: 44300SJKJ01, 44300SWWE01, 44300T0A951, 44300T1GA01, 44300SHJA51, 44300T0G951
Reference Numbers (Interchange):
SKF: VKBA7440
SNR: R174.45
FAG: 713617910
BRT: BRT7440
MOOG: 513286
Vehicle Fitment
HONDA: CR-V IV (RM_) – 2012 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, and retaining nut – all components for a full bearing replacement
- Specifically engineered for Honda CR-V IV front axle applications
- Direct interchange with SKF VKBA7440, SNR R174.45, and FAG 713617910
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and nut x1
- Confirm front axle fitment for your specific Honda CR-V IV model (2012 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nut supplied – do not reuse old retaining hardware
- Torque the retaining nut to Honda service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
